Delavan PowerFlo 2200 Series 1.2 GPM, Diaphragm Demand Pump | 2200-201-SB
1.2 GPM, DEMAND, 12VDC, 2 PIN CONNECTOR, 40PSI
Demand Pumps include a built-in pressure switch to automatically stop and start the pump at specific pressure settings.
- Pump Type: Demand
- Flow: Up to 1.2 GPM
- Pressure: 40 PSI
- Valves: Viton
- Diaphragm: Santoprene
- Ports: 3/8” Hose Barb
- Power: 12V – Wire Leads with 2-pin molded connector
- Weight: 3 lbs.
- Can be run dry
- High torque motor for greater flow at pressure
- 100% Factory tested
Demand Pumps include a built-in pressure switch to automatically stop and start the pump at specific pressure settings. These pumps only run when discharge outlets are
open and fluid delivery is needed. However, ON/OFF cycling at extreme frequency can cause damage to the pump components.
Pump only runs when flow is needed and offers reduced noise during system idle.
Automatically turns pump off when not in use.
Spot spraying, soft wash, single outlet systems