Delavan PowerFlo 3.6GPM, 45PSI Demand Diaphragm Pump | 5836-201C-SB
3.6GPM, DEMAND, THREADED PORTS , 12VDC, 45PSI
2-chamber double-diaphragm pump can be used for chemical transfer, soap dispensing, or to inject liquid fertilizer. Pump operates with CO2, nitrogen, or clean, filtered, compressed air. Performance varies with liquid viscosity.
- Inlet/Outlet: 1/2 in FNPT
- Housing Material - Pumps: Polypropylene
- Max. Temp - Pumps: 140 Degrees F
- Max. Flow: 3.6 GPM
- Max. Pressure - Pumps: 45 PSI
- Voltage - Pumps: 12V DC
- Type: Diaphragm
- Diaphragm Material: Santoprene(R)
- Check Valve: Viton(R)
- Pressure On: 20 psi
- Pressure Off:100 psi
- Length (In.): 9.1 in
- Width (In.): 5 in
- Height (In.): 4.58 in
- Prime in Feet: 14
- GPM @ 0 PSI: 3.6
- GPM @ 20 PSI: 3
- GPM @ 40 PSI: 2.4
- Motor Type: Totally Enclosed Nonventilated
- Self-Priming: Yes
- Fuse Amps: 15 A
- Pressure Switch: Yes
- Diaphragm Design: Five Chamber
- Agency Compliance: CE/NSF
Demand Pumps include a built-in pressure switch to automatically stop and start the pump at specific pressure settings. These pumps only run when discharge outlets are
open and fluid delivery is needed. However, ON/OFF cycling at extreme frequency can cause damage to the pump components.
Pump only runs when flow is needed and offers reduced noise during system idle.
Automatically turns pump off when not in use.
Spot spraying, soft wash, single outlet systems