Shurflo 12vDC Positive Displacement Diaphragm Pump 60psi | 8009-593-836
The Shurflo 12vDC Positive Displacement Diaphragm Pump 60psi has a patented 3 chamber diaphragm pump design. The Pump can set for different pressures to meet your needs for the fluid that you desire. Because of the rugged design this pump is widely used in road roller equipment. A check valve makes this pump the top of the line in its category. Below listed are the specifications for this top of the line piece of equipment.
PUMP DESIGN: Positive Displacement 3 Chamber Diaphragm Pump
CHECK VALVE: (1-Way Operation) Prevents Reverse Flow
CAM: 2.0 Degree
MOTOR: Permanent Magnet, P/N 11-148-00, Thermally Protected, On/Off Switch, Connector
VOLTAGE: 12 VDC Nominal
PRESSURE SWITCH: Adjustable Shut-Off (Range 40-60 PSI)
Factory Set @ 60 PSI, Turn On 45 PSI 5 PSI
LIQUID TEMPERATURE: 170 Degrees Fahrenheit (77 Degrees Centigrade) Max.
PRIME: Self-Priming Up To 11 Ft. Vertical,
Max. Inlet Pressure 30 PSI (2.1 Bar)
PORTS: 3/8″-18 NPT Female
MATERIAL OF CONSTRUCTION:
PLASTICS -Polypropylene
VALVES -Viton
DIAPHRAGM -Santoprene
FASTENERS – Zinc Plated Steel
NET WEIGHT: 4.38 Lbs (2.0 Kg)
DUTY CYCLE: Intermittent
TYPICAL APPLICATIONS: Agricultural Spraying
