TeeJet XR 80 degree Extended Range Blue Flat Spray Tips | XR8003VS
The XR TeeJet® is an extended range flat fan spray tip for low-volume applications providing high-quality droplet size and ground distribution. The tapered edge flat spray angle pattern produces uniform coverage in broadcast spray applications with reduced drift at lower pressures and better coverage at higher pressures.
Benefits:
- Excellent spray distribution over a wide range of pressures 15-60 PSI (1-4 bar).
- Reduces drift at lower pressures.
- Better coverage at higher pressures.
- Ideal for rigs equipped with sprayer controllers.
Features:
- Tapered edge flat spray angle pattern for uniform coverage in broadcast spray application.
- Ceramic is available with corrosive resistant polypropylene VisiFlo color-coded tip holder in 80° capacities 03–08 and 110° capacities 02–08.
- Brass is available at 110° only.
- Automatic spray alignment with 114441A-*-CELR (01 to 08) or 114443A-*-CELR (10 and 15) Quick TeeJet® cap and gasket.
- Reduces drift at lower pressures, better coverage at higher pressures.
Recommendations:
Best results are achieved when used under the following conditions:
- No wind or winds < 5 Km/hour.
- Hydrometry greater than 80%.
- Optimum operating pressure ~ 1.4 Bar.
- To limit drift, use at low pressure (< 1.8 Bar).
- We recommend XR 80° VS with a capacity of 01, 015, and 02 for low volume application, and ceramic tips for all other capacities.
Nozzle Filter: XR8001 & XR80015 = Filter 100 Mesh | Others XR80° = Filter 50 Mesh
ISO Standard Color coding for tip capacity.
Applications:
Performance:
Drop Size Classification:
Note: Always double check your application rates. Droplet size classification shown is based on ISO 25358. Droplet size classification standard is subject to change. Tabulations are based on spraying water at 70°F.
†Available in all stainless steel only.
Spray Distribution:
*At pressures below 30 psi (2.0 bar)
