Ace Gasoline Engine Driven Centrifugal Pump | GE-75-LE
Ace Gasoline Engine Driven Centrifugal Pumps provide service where power sources are limited or unavailable. The pumps are ideally suited to develop pressure for spray or transfer applications. The pumps feature a direct coupled design with an easily replaceable mechanical seal and slinger ring between pump and engine to prevent liquid from damaging the engine.
Features:
- Suction: 1
- Discharge: 3/4
- Max Pressure: 65 PSI
- Max Flow: 24 GPM
- Less Engine
- Barske Tall Blade Impeller Design - Higher Pressures at Standard Engine Speeds
- Impeller Attaches Directly to 5/8” Keyed Shaft Engine
- Fits Economical Honda or Briggs & Stratton Engines
- All Polypropylene Corrosion Resistant Construction
*Do not use with flammable liquids.
*Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for
extended periods of time will result in excessive heat and pump failure. Running the pump with
flow shutoff for more than 5 minutes causes the fluid temperature to rise and melt pump
components. A bypass is recommended for low flow applications.
*Do Not Run Dry - Seal damage or failure will result from running dry. Impeller damage may also
occur if run dry for an extended period.
