Flojet Triplex Sprayer Pump, 12V, 3/8 NPT, 2 GPM | 03501503A
Triplex Series pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The Triplex pumps are self-priming and can run dry without harm. They are intended for intermittent duty cycles but can be run continuously for a short periods of time. The higher the duty cycle, the shorter the expected life of the pump. Typical uses include transfer, delivery, spraying, cooling, filtration, dispensing, and pressure boosting. This pump is fitted with a rocker (manual on/off) switch and inline DC connector.
Features:
- Pump Design: Motor operated 3 chamber diaphragm
- Motor Design: Permanent magnet DC TENV (Non-Ventilated)
- Rectified (PmDC) AC
- Voltages:
- 12 VDC, 24 VDC
- 115 VAC, 230 VAC
- Cycles: 50/60 Hz
- Amp Draw:
- 8 amps max. for 12 VDC
- 0.65 amps max for 115/230 VAC
- Pump Head: Reinforced Polypropylene
- Elastomers:
- Diaphragm Santoprene™
- Check valves EPDM or Viton
- Max. Flow Rate: 2.0 GPM (7.6 LPM)
- Max. Pressure: 50 psi (3.4 bar)
- Liquid Temperature: 40° F (4° C) Min*
- 140° F (60° C) Max*
- Duty Cycle: Intermittent
- Weight: 3.4 lbs (1.5 kg)
- Wiring Options: Standard 18” (46 cm) leads
- 6 ft. (2 m) cord available for AC
- Certifications: AC, UL, CE, NSF Components
