Hiniker Nitro-Lert 30 Foot Line Sensor Extension Cable | 38818014
The Hiniker Nitro-Lert anhydrous ammonia knife monitor system alerts operators to individual blocked manifold outlets, lines or knives. In-line sensors for each outlet monitor for flow variations and alert the operator to potential problems.
- 30 foot Line sensor extension cable. (Typically used from the center of the applicator to sensor number one on the distributor on the left end of the applicator).
Typical problems identified by Nitro-Lert users include:
- Nitro-Lert detected a plugged knife that occurred when the operator turned off the flow to one section of the applicator. When the section was turned back on, one of the knives had plugged with dirt, blocking flow and triggering a Nitro-Lert notification.
- Broken knives. Nitro-Lert detected a variation in flow through the broken knife and alerted the operator to the problem.
- Nitro-Lert detected partial blockage caused by welding slag that was left in the knife tubes during the manufacturing process.
With a Nitro-Lert system you'll detect problems as they occur, while they can be corrected!