Hopper Walker

Hopper Walker | H2

Stop Sensors - The Stop Sensors mount to the spout head retainer of your auger and will automatically stop the hopper at either the home or unload position. Keep one hand on the wheel and one hand on the shifter as you position your truck because the Hopper Walker® will automatically position your hopper. Fine tune the hopper’s position using either the remote or the joystick.
Remote Control - The industrial Remote-Control fits in your hand and is easy to use while wearing gloves. The recessed buttons allow you to put the remote in your pocket without the fear of accidentally moving your hopper. The breakaway lanyard lets you keep the remote close but gives you peace of mind if it gets caught on something.
12-VDC Motor - The two 12-VDC motors are powered by your tractor. An 8-foot Fused Power Cable directly connects to your tractor’s battery. The outside motor is geared to run at a faster RPM than the inside motor. The keyed axle shafts are mounted through the hopper’s existing wheel holes using bushings, brackets, and lock collars. The wheels follow the factory hopper arc. The motors can be easily removed by loosening the anti-rotation bracket knob and sliding the motor off the axle shaft.