US Dollars
Canadian Dollar
Australian Dollar
Euro
Product Description
John Blue 2" FPT with Honda GX200 Engine | PSP-3240-G6H
Features:
- Fully-assembled from the Factory—ready to be attached to power source immediately.
- Double Wet Seal Assembly—pump can be run dry without causing seal failure, seal is antifreeze cooled. (Antifreeze is pre-filled from the factory.)
- Closed Impeller Technology—pump efficiency improves over time as the impeller wears.
- Polypropylene Body, FKM and Viton® Seals, 316SS Impeller Shaft for excellent chemical resistance.
- Pump can be removed, or engine can be replaced without having to disassemble the pump.
- 1″ FPT pressure access & ½” FPT drain port.
Specifications:
- 200 GPM Max Flow
- 45 PSI Max Pressure
- 112 GPM @ 25 PSI
- Required Horsepower: 5 Hp
- 2" Port Size
- Vac-U-Seal Impeller
- Close-coupled Shaft
- Fits 3/4" Diameter Shaft
- Double Wet Seal Assembly
- Chemical Resistant Materials
- Convenient carry handles allowing clearance for discharge elbow installation.
- Vac-U-Seal impeller design creates a vacuum between the impeller and seal. Lack of pressure on the seal face minimizes seal wear resulting in longer seal life.
- Close-coupled shaft with Cast iron engine mount for mount strength and heat dissipation from the motor.
- Screw-in flange fittings are standard on -FLG models, and optional on all other models.
Shaft Locating ToolShaft locating tool installed at the factory which prevents  |
Pump Flow Curves (for 2″ pump only)2-in-1 Inlet Design (patent pending): Use center inlet for  |
In addition to being an excellent choice for most agriculture and industrial uses, the PSP-3240 is an excellent choice for transferring liquid deicing product, to keep your surfaces free of ice and snow. These centrifugal pumps comes fully-assembled from our factory, and are made entirely out of Polypropylene, FKM, Viton, and 316 Stainless Steel — they can handle even the harshest liquid de-icing products on the market! Dry salt products can cause concrete damage and leave behind a dusty, messy residue, but liquid salt products can give faster results, work in lower temperatures, and dry to a fine consistency that simply blows away (less mess!). John Blue Poly-Centrifugal pumps are the most dependable and affordable choice for your de-icing applications.
OPERATION WARNING!
Always stop operation of pump using the pump’s power source before closing any fluid valves on system plumbing. Failure to stop pump operation before shutting off fluid valves can cause the pump to damage from increased pressure, and will not be covered under warranty.
