Pioneer Non-Spill Breakaway Coupling | FRM-371-22MM-1146
The FRM-371-22MM-1146 Non-Spill Breakaway Coupling helps reduce hydraulic motor seal failures. It features flush face valving and is designed for use on case drain lines, which are required on air seeder applications. This coupling’s unique interface prevents standard Pioneer ISO male tips from being connected in error.
This rigid mount coupler features a breakaway mechanism that will separate when a 45 lbs. linear force is applied, or when pressures in the case drain line exceeds 200 PSI.
When used in conjunction with Pioneer male tip 0303-050, it provides double protection against damage to hydraulic components.
This item is used on the following models:
John Deere: Series 5, Series 6 and Series 7, Series 8and Series 9 Tractors
This item is equivalent to John Deere #TA19919 and substitutes previous part #RE584722 and #RE222718.
Specifications:
- Body Size: 3/8"
- Pressure Rating: 100 PSI
* Note: Do not use the Pioneer FEM-372 in this application The special 3003-050 pressure relieving male tip can be used on air seeders of any makes to prevent motor seal damage.
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
- This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.
- The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
- To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
