Customer Service Hours: MONDAY-FRIDAY, 8AM-5PM CT
Free Shipping on Orders Over $229+ Exclusions Apply

Remco 5.3 GPM Demand Pump | 5537-1E1-82B

8.00 LBS
Calculated at Checkout
Remco 5537-1E1-82B Product Manual:
5537-1E1-82B Product Manual
Remco 5537-1E1-82B Product Documentation:
5537-1E1-82B Product Documentation
Remco 5537-1E1-82B Product Specifications:
5500 Specifications
Power Type:
12 V Electric
Flow Rate (GPM):
5 - 10
Gasket Material:

Remco 5.3 GPM Demand Pump | 5537-1E1-82B

Remco's 5500 series 5.3 GPM Sprayer pump is the Professional Grade choice for performance and efficiency. This sprayer pump utilizes a 60 PSI pressure setting and Remco's signature sealed 12 volt electric motor allowing the pump to operate in the harshest environments. The 5500 Series is Made in the U.S.A and engineered with Professional Grade components able to withstand long and continuous duty cycles of Agricultural spray applications. Utilizing heavy 14 AWG wire leads the Remco 5500 Series has low operating temperatures and is extremely efficient. This 5.3 GPM pump's materials of construction are compatible with most common agricultural spray chemical including herbicides, fertilizers, and insecticides. The Professional Grade 5500 Series Spray pump is engineered to withstand the most rigorous and punishing duty cycles, a top of the line performer for all pumping needs.


  • Professional Grade Quality 
  • 5.3 GPM (20.06 LPM), 60 PSI (4.1 Bar) on Demand
  • Made In the U.S.A
  • 6" length 14 AWG wire leads wit SAE 2 pin connector
  • Highest flow rate and lowest operating temperature at spray pressures when compared to other pumps
  • Chemically compatible with common Agricultural chemicals like herbicides, fertilizers, and insecticides
  • 100% Factory Tested
  • Completely Sealed Motor
  • Low Heat and Power Consumption
  • Superior Vertical Priming


  • Type: 5 Chamber diaphragm pump
  • Mode: Demand 
  • Voltage: 12 VDC
  • Fluid Port: 1/2" FNPT threaded Ports
  • Valves: Viton
  • Diaphragm: Santoprene

Technical Information:

  • 14 AWG - 6” OR 12” 2-Pin Mold / Custom Connection
  • Self priming up to 14' (4.0 m) vertically
  • Intermittent Duty Cycle
  • Dry run capability
  • 140°F (60°C) max liquid temperature
  • 180°F (82°C) max motor temperature
  • Temperature Limits Motor is not equipped with thermal protection. For user safety, optimal performance, and maximum motor life, the motor surface temperature should not exceed 150°F (66°C)

Typical Applications:

  • Agricultural and Industrial Chemical Spraying
  • Automotive Fluid Exchange
  • Bulk Fluid Transfer
  • Equipment Washdown
  • Liquid Fertilizer
  • Dust Suppression