ACE Hydraulic Driven Centrifugal Pump | FMCSC-205F-HYD-304
Features:
- Suction 300 Series Standard Port Flange
- Discharge 220 Series Full Port Flange
- Recommended for use on the following Hydraulic Systems: Pressure Compensating Closed Center; Load Sensing or Pressure Flow Compensating Closed Center; Open Center from 10 to 20 GPM
- 304 motor requires 13 GPM hydraulic flow
- Integral Needle Valve bypasses up to 9 GPM on Open Center Systems
- Type 2106 Silicone Carbide Mechanical Seal for Improved Survivability
- Chemical Resistant Valox Impeller
- Cast Iron Pump
- Stainless Steel Shaft and Wear Ring
- Larger 203 Bearings for Longer Life
- Maximum Gallons Per Minute - 240 GPM
- Maximum PSI - 120 PSI
Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period.
Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications.
