TeeJet DirectoValve w. Viton | AA144A-1-VI
Features:
- Flow Rate: 10 GPM (37.9 L/min) at 5 PSI (0.35 bar) pressure
drop, 14 GPM at 10 PSI pressure drop. - Can be ganged with other 144A DirectoValve control valves.
- 2.5 amp current draw.
- Polypropylene body for chemical resistance.
- Fabric reinforced diaphragms.
- 3/4” inlet, 1/2” outlet.
- Also available as 2- or 3-unit assembly.
- Operating pressure range 0-100 PSI
(0-7.0 bar) - Coil can be changed without removing
valve from line. - Nylon encapsulated 12 VDC coil with
recessed 1/4"Quick Connect terminals...
power requirements 2.5 AMP. - Good Corrosion resistance.
- Internal metal parts are stainless
steel...other metal parts are epoxy
coated or electroless nickel plated. - Chemical resistant EPDM seat washer
and diaphragms.(Standard),Viton
(Optional)
A A144P-, A A144A- & A A145H - DIRECTOVALVE CONTROL VALVES:
- Direct acting; large internal flow chamber without pilot hole reduces chance of clogging.
- Stainless steel wetted parts provide additional corrosion resistance.
- Operate on 12 VDC system.
- Maximum pressure of 100 PSI.
- Encapsulated solenoid coil can be changed without removing valve from system.
- EPDM diaphragms and seat washers, FKM optional.
- Continuous flow through bypass connection, with flow to spray line controlled by valve “on-off” action.
