Delavan PowerFlo 3.6GPM, 45PSI Demand Diaphragm Pump | 5836-201C-SB
3.6GPM, DEMAND, THREADED PORTS , 12VDC, 45PSI
2-chamber double-diaphragm pump can be used for chemical transfer, soap dispensing, or to inject liquid fertilizer. Pump operates with CO2, nitrogen, or clean, filtered, compressed air. Performance varies with liquid viscosity.
- Inlet/Outlet: 1/2 in FNPT
- Housing Material - Pumps: Polypropylene
- Max. Temp - Pumps: 140 Degrees F
- Max. Flow: 3.6 GPM
- Max. Pressure - Pumps: 45 PSI
- Voltage - Pumps: 12V DC
- Type: Diaphragm
- Diaphragm Material: Santoprene(R)
- Check Valve: Viton(R)
- Pressure On: 20 psi
- Pressure Off:100 psi
- Length (In.): 9.1 in
- Width (In.): 5 in
- Height (In.): 4.58 in
- Prime in Feet: 14
- GPM @ 0 PSI: 3.6
- GPM @ 20 PSI: 3
- GPM @ 40 PSI: 2.4
- Motor Type: Totally Enclosed Nonventilated
- Self-Priming: Yes
- Fuse Amps: 15 A
- Pressure Switch: Yes
- Diaphragm Design: Five Chamber
- Agency Compliance: CE/NSF
Demand Pumps include a built-in pressure switch to automatically stop and start the pump at specific pressure settings. These pumps only run when discharge outlets are
open and fluid delivery is needed. However, ON/OFF cycling at extreme frequency can cause damage to the pump components.
Advantages:
Pump only runs when flow is needed and offers reduced noise during system idle.
Automatically turns pump off when not in use.
Common Uses:
Spot spraying, soft wash, single outlet systems